307 Anti Friction Coating 703

Description

Extreme Pressure Industrial grease fortified with friction reduction additives.

ANTI FRICTION COATING 703 is a smooth textured, functional polymer based dual thickened lithium-calcium, extreme heavy duty grease of NLGI 2.5 consistency, which combines the performance advantages of both lithium and calcium greases. It contains Extreme Pressure (EP) additives, film thickness enhancement polymers to improve boundary lubrication scenarios, oxidation, rust and corrosion inhibitors and is fortified with proprietary dual solid friction reduction additives. Whilst providing exceptional wear protection, excellent water washout and spray off resistance, along with rust inhibition, it can be dispensed at low temperatures and provides long life in applications operating at elevated temperatures. It may be used in most applications requiring an EP NLGI 2.5 extreme heavy duty grease recommended for long-term use in equipment with an operating temperature range of -20°C to 130°C.

ANTI FRICTION COATING 703 is adhesive to metal surfaces and resist run-off and drip due to gravity or by centrifugal force. Additional ecological acceptable EP, Anti-wear, oxidation and corrosion additives ensures further equipment protection under a wide variety of applications.

Application:

ANTI FRICTION COATING 703 is recommended for the lubrication of open gears, racks, chains, wire ropes, rollers, tracks, slides, sprockets, etc. in the steel, cement, paper, chemical, mining, quarry and other industries requiring heavy duty lubrication under extreme and severe mechanical load and environmental conditions such as shock loads, vibration and contamination by dirt and water. The grease is also suitable for applications involving oscillating or little relative movement, where fretting corrosion may be prevalent – i.e. on construction equipment and turntables.

ANTI FRICTION COATING 703 is recommended for rough plain bearings, slides and other parts, e.g. oven conveyor chains, gears and bearings of boiler soot-blowers, axle lubrication of trolleys operating in high temperature kilns and on the skates of pantographs of electrical locomotives, rail and flange and trolley buses. It can also be used as an anti-seize compound for nuts, bolts and gaskets. Operating temperature grades are: – 20°C to +130°C.

ANTI FRICTION COATING 703 is recommended for use as chassis grease and it is particularly suitable for “off-road” applications in civil engineering (pin and bush) and agriculture. Further applications include lubrication of industrial plain and anti-friction bearings where severe or shock loads are experienced. It is highly effective in applications involving oscillating or limited relative motion, where fretting corrosion is likely to occur. It is also suitable for use in constant velocity joints (CV’s), machine tools, vibrating shafts and sliding mechanisms.